Front View
WISI Optopus Externally Modulated CCTV and Satellite Transmitter
20MM-LX10L8001
Discontinued Product
Features and Benefits
- Externally Modulated CATV/Satellite Optical Transmitter suitable for use with high power EDFA
- Dual optical outputs +8dBm with optical wavelength 1555nm (± 1nm)
- Management via web interface and SNMP
- CATV 47-1006Mhz, Satellite 950-2800Mhz
- Redundant & hot swap-able power supplies
- Field adjustable SBS suppression
Pack Quantity
Inner: 1 box of 1 piece
Helpful Tip: Bulk cartons prevent potential transit damage.
Specifications
| Wave length | 1555 nm (± 1 nm) |
|---|---|
| Specified link length | 25 km (in combination with additional EDFA) |
| Optical output power | 2x +8 dBm |
| SBS suppression | ≥ 14,0 dBm |
| Carrier to noise ratio | ≥ 51,0 dB |
| Signal performance (37 analog, 50 digital) CSO/CTB | ≥ 70,0 dBc |
| Input level | 78 / 87 dBμV (PAL-Level/SAT-IF) |
| Front panel RF gain/OMI adjustment range | +2/-4 dB (from nominal setting) |
| CATV frequency range | 47...1006 MHz |
| CATV flatness | ± 0.50 dB (47 MHz ... 550 MHz), ± 0.75 dB (47 MHz ... 1006 MHz) |
| CATV electrical return loss | ≥ 16 dB (47...1006 MHz) |
| CATV RF test point | -20 dB (± 1 dB) |
| SAT-IF frequency range | 950...2800 MHz |
| SAT-IF flatness | ± 2 dB |
| SAT-IF electrical return loss | ≥ 10 dB (950...2800 MHz) |
| SAT-IF test point | 7 ± 62.5 dBμV/Ch @ 1 % OMI/Ch |
| General data | |
| Optical connectors | Rear: SC/APC |
| EMC | EN50083-2 |
| Safety standards | IEC 60950-1; IEC 60728-11; Laser IEC 60825-2 |
| Operating temperature range | 0...50 °C (ETSI EN 300 019-1-3 Class 3.2) |
| Supply voltage | 230 V AC, AC primary, AC secondary |
| Power consumption | ≤ 65 W |
| Dimensions (width x height x depth) | 483 x 45 x 381 mm |
| CNR test configuration | EDFA: 15 dBm, Link: 25 km, Received Power: 0 dBm |