Front View
High-Output Fibre Optic Receiver
20MM-LR26S
Fibre Optics
Matchmaster provide an extensive range of IP and fibre solutions for RF overlay and distribution. Simple IP solution using SAP protocol without the need for middleware through to advanced hospitality solutions. Simple fibre solutions for CATV and L-band in 1310nm and 1550nm wavelengths including DWDM solutions for 5 wire over single fibre distribution.
View More Fibre Optics
Features and Benefits
- High-output wideband fibre-optic receiver from the WISI range of fibre-optic components
- Works with both the LT61S and LT54S variety of transmitters
- Effectively combines a fibre-optic receiver and high-powered amplifier in the one convenient package
- AGC circuitry included to ensure output is consistent
Pack Quantity
Inner: 1 box of 1 piece
Helpful Tip: Bulk cartons prevent potential transit damage.
Specifications
| Wavelength | 1290nm - 1600nm |
|---|---|
| Optical return loss | > 40 dB |
| Fibre | Single Mode 9 / 125 µm |
| Optical connector | SC/APC |
| Output impedance | 75 ohm |
| Output return loss | > 18 dB |
| Transmission bandwidth | 47 - 862 MHz |
| Required optical input level | -7 ... +0 dBm |
| Controlled output level (42 CH Cenelec) | 111 dBµV |
| Attenuator adjustable | 0-15 dB (0.5 dB steps) |
| Equalizer adjustable | 0-15 dB (0.5 dB steps) |
| RF text point at output | -20 dB |
| Operating voltage | 180-265 VAC |
| Power consumption | < 15 W |
| Connectors | PG11 |
| Protection class | IP 24 |
| Operating temperature | -20°C ... +55°C |
| Dimensions | 232 x 145 x 86 mm |