The RB01 is a premium quality EPDM rubber roof seal designed for cable and conduit roof penetrations. The RB01 features a durable aluminium foot moulded into the base, allowing you to easily form to multiple roof profiles and allows self-tapping screws to be used to fasten the seal into place where needed. The black EPDM is UV, and high temperature rated, lead-free and highly durable, making it the right choice for use in the harsh Australian environment.
View More Roof Seals and Penetrations
Tensile Properties | |||
---|---|---|---|
Before UV Exposure Test Results | |||
Method | Tensile Strength at Break | Elongation at Break | Results |
ASTM D412 | 8.09MPa Average | 330% Average | Complies |
After 2000hrs UV Exposure | |||
Method | Tensile Strength at Break | Elongation at Break | Results |
ASTM D412 | 8.09MPa Average | 330% Average | Complies |
Tear Resistance | |||
---|---|---|---|
Method | Maximum Force | Maximum Force / Thickness | Results |
ASTM D624 | 56 Newton Median | 29.0 N/mm | Complies |
Flammability of Rubber | |||
---|---|---|---|
Method | Test | Conditioning | Results |
UL 94 | One | 23±2°C and 50±10% Relative Humidity for 48 hours | Complies |
UL 94 | Two | 70±2°C for 168 hours | Complies |
Ozone Resistance of Rubber | |||
---|---|---|---|
Method | Conditions | Observed Outcome | Results |
ASTM D1149 Method A | 72 hours at 40°C (107°F) and 50 pphm Ozone | No cracking observed | Complies |
UV Resistance of Rubber | |||
---|---|---|---|
Method | Conditions | Requirements | Results |
ASTM G154 | 8 hours UV at 60°C (0.89W/m2.nm irradiance), 4 hours condensation at 50°C | Max 50% loss in Tensile Strength and Elongation | Complies |