Hi and welcome to the Matchmaster tutorial on how to find the perfect antenna suited for your area and where to find one.
To begin, click on the antenna selection guide or type in www.matchmaster.tv. There, you will find the homepage of the antenna selection guide. We are going to take you through step-by-step on what to do.
Firstly, please type in the address that requires the antenna. It can be your house, an apartment or commercial property. When typing in the address, a tab will pop open underneath, please click on the correct address. There are four basic questions below, for this example we are going to be using these. Question 1: how many outlets required? Today let’s go with 4 outlets. One in the lounge, two in the bedroom and one in the kitchen. Do you live in an apartment? No. Is satellite pay tv required? Let’s go no. Are any FM outlets required? No. Click the find antenna button.
This will take you to a summary page of your recommended antenna. Today we have the 03MM-DC21V. As you scroll down, you will see the picture and basic specs, the installation diagram, the required parts list and your nearest wholesalers.
You will notice on the right hand side of the wholesalers, you have one or two options. Enquire now, which allows you to send the parts list to your selected wholesaler or a buy now button that instantly adds the parts list to the wholesales online shopping cart.
To find the direction to point the antenna, when installing, please check transmitter details and on the map, the red line will show you which transmitter to point towards to get the best reception.
Once finished viewing this page, simply download it as a PDF or you can email the report to yourself. Also, if you would like to modify your selected antenna, you can change it by clicking on alternate antennas at the top of the page, which will recommend other antennas for your area.
For further information, please give us a call on 1800-AREIAL or visit out website matchmaster.com.au. Thanks for watching.
Hello and welcome to Matchmaster, for the best.
Today, I will be taking you through the simple set up of the 03MM-1EFM.
It’s an FM Radio antenna with a UHF/VHF diplexing balun built in.
The features of this antenna is that it has a built in low pass 4G LTE filter, it recieves from 88-108MHz for FM band
The diplexing balun input allows for VHF 170-230 MHZ and UHF 470-694 MHZ. It is also DC power passing to allow power to pass through to a mast amplifier.
It can be used alone or combined with your existing TV antenna, it is also ideal to be used with our 05MM-WP05 FM/TV-SATELLITE diplexing outlet plate, sold separately, (shown here)
The 05MM-WP05 outlet plate allows you to provide a separate FM and TV/SATELLITE connection from one outlet cable which will help reduce interference to the TV/Set Top Box tuner by only allowing the desired frequency to pass and also provides a dedicated FM connection point for your FM Receiver.
The 05MM-WP05 is DC power passing only on the TV/Satellite port for passing power to a mast head amplifier, it has an FM frequency range of 88 to 108MHz and TV/Satellite frequency of 174-694MHz for TV and 950 to 2450MHz for Satellite
Okay, let’s get started.
Make sure you have it facing the right way up.
Attach it onto your mast, at least 1 metre underneath your existing TV antenna, if you have one.
Tighten the screws of the FM antenna onto your mast.
Connect the TV antenna cable to your FM antenna input, slide the weather proof rubber boot over.
Connect the output cable to the output of the balun and slide the weather proof rubber boot over.
For more information, please give us a call on 1800-AERIAL or visit our website matchmaster.com.au.
Thanks for watching.