20MM-LX30S2101 - Optopus EDFA Module 1x21dBm

Optopus EDFA Module 1x21dBm

20MM-LX30S2101

Fibre Optics

Matchmaster provide an extensive range of IP and fibre solutions for RF overlay and distribution. Simple IP solution using SAP protocol without the need for middleware through to advanced hospitality solutions. Simple fibre solutions for CATV and L-band in 1310nm and 1550nm wavelengths including DWDM solutions for 5 wire over single fibre distribution.
View More Fibre Optics

Features and Benefits

  • Optical amplifier for use in WISI Chassis LX50
  • 1 X 21dBm output SCAPC with adjustable power
  • Amplification of optical signals in the C-band
  • Optical test port for the output signal
  • Wide input power range enables application as booster- or inline-amplifier
  • Low electrical power consumption

Specifications

Amplifier inputs 1 pcs.
Optical input power -2...+10 dBm
Amplifier outputs 1 pcs.
Optical output power 1x 21,0 dBm
Output level tolerance ±0,5 dB (Variation of output power over polarization, wavelength range and temperature range)
Output level variation ±0,5 dB
Wavelength 1530...1565 nm
Setting range amplifier 5 dB (0,1 dB-steps)
Noise figure ≤5,5 dB (at 0 dBm input power, nominal output power and signal wave length 1550 nm)
Return loss ≥45 dB (input - output)
Isolation ≥40 dB (output - input)
Optical test point output -2.5 dB (in relation to EDFA-output power)
Connectors
SC/APC connectors 1 pcs.
General data
Power consumption max. 22 W
Dimensions (WxHxD) 30 x 133 x 320 mm
Environmental parameters -5...+45 °C (ETSI EN 300 019-1-3 Class 3.1)