20MM-LX50-230 - Optopus Base Unit with Single 230V PS

Optopus Base Unit with Single 230V PS

20MM-LX50-230

Fibre Optics

Matchmaster provide an extensive range of IP and fibre solutions for RF overlay and distribution. Simple IP solution using SAP protocol without the need for middleware through to advanced hospitality solutions. Simple fibre solutions for CATV and L-band in 1310nm and 1550nm wavelengths including DWDM solutions for 5 wire over single fibre distribution.
View More Fibre Optics

Features and Benefits

  • Optopus base unit for up to 14 optical modules - 4RU
  • Tool less hot-swap modules, power supply units and fans
  • Mechanical back plate for optical and electrical connectors enables module exchange without re-cabling
  • Local and remote management
  • Built in RJ45 and SFP management ports
  • Fully redundant power supply concept
  • This field is for validation purposes and should be left unchanged.

Specifications

Network Interfaces
Management Ports RJ45 2 pcs. (Ethernet 10/100 Base-T)
Management Ports SFP 2 pcs. (Ethernet 1000 Base-X)
Local Management Ports RJ45 1 pcs. (Ethernet 10/100 Base-T)
Management Protocols IPv4, SNMP v1/v2c/v3, DHCP, HTTP, SFTP, SNTP, SSH
Extension Ports RJ45 2 pcs. (Ethernet 10/100 Base-T)
Power supply
Cold-device plug, IEC 60320-C14 2 pcs. (rear)
Power supply slots 2 pcs. (for LX 55 0230, front)
Nominal Input Voltage AC 230 V AC (with LX 55 0230)
Power consumption max. 240 W (Base Unit alone: max. 25 W)
General data
Module slots 14 pcs. (active Modules on front, passive on rear panel)
Dimensions (WxHxD) 483 x 178 x 330 mm (19“, 4 RU)
Operating temperature range -5 ... +45°C (ETSI EN 300 019-1-3 Class 3.1)
Storage temperature -20 ... +75 °C
Enclosure Classification IP20
Electro Magnetic Compatibility (EMC) EN 50082-1, EN 50082-2, EN 50083-2, EN 55022 Class B