08MM-QM06 Instruction Video

Video Transcript

Hi, today I’ll be talking you through the setup of the QM06. Here is what it looks like fully terminated. The equipment needed to assemble this connector is the coax cable stripper, the compression tool, RG6 quad shield cable, a set of pliers and of course the connector.

The QM06 is a cablecon quick mount, our very own innovative compression connector. Firstly, get your stripper tool, insert the cable and wind it around. There is no need to pull back the braid or remove the foil sheath as with the traditional connector.

Then, place on connector and simply compress. Grab your compression tool, open handles, insert prepared connector, and crimp by squeezing the handles together. Lastly, use pliers or side cutters to cut off the centre conductor to approximately 1 millimetre from the connector and the job is done.

For further information, please call 1800-AERIAL or visit our website matchmaster.com.au

Thanks for watching.