57MM-AP01 - Wi-Fi Access Point AC1300 802.11ac Dual-bands 1.3 Gbps (100Mbps Uplink)
Front View
57MM-AP01 - Wi-Fi Access Point AC1300 802.11ac Dual-bands 1.3 Gbps (100Mbps Uplink) Back of Product Image
Rear View
57MM-AP01 - Wi-Fi Access Point AC1300 802.11ac Dual-bands 1.3 Gbps (100Mbps Uplink) Packaging Image

Wi-Fi Access Point AC1300 802.11ac Dual-bands 1.3 Gbps (100Mbps Uplink)


Ruijie No. RG-RAP2200(F)

Product Summary

The 57MM-AP01 is a budget ceiling/wall mount access point for covering large indoor areas with gigabit Wi-Fi coverage. The AP01 is limited by a 100 Mbps uplink which is still suitable for modest amounts of internet outbound traffic. The AP01 is an AC1300 dual-band ceiling/wall mount Wi-Fi access point supporting 802.11ac Wave2 1.3 Gbps (100 Mbps uplink).
View More Networking and Data

Features and Benefits

  • Dual-band 802.11ac wave2 1.3 Gbps (100 Mbps uplink)
  • Supports concurrent 802.11ac wave2, wave1, 802.11a/b/g/n protocols
  • Free lifetime Ruijie cloud management: Remote fault alarm, one-click optimisation and maintenance on the Ruijie cloud app.
  • Featuring 2x LAN interfaces to provide support to more devices and services.
  • Perfect for connecting home smart Wi-Fi devices to the internet
  • Seamless layer three roaming

Find a Stockist Now

Latest Promotion Ad Image


Ruijie Access Point Setup Guide Video


Hardware Specifications
Radio Dual-stream dual-band
Protocol Concurrent 802.11ac wave2, wave1, 802.11a/b/g/n
Operating Bands 802.11b/g/n: 2.4G ~ 2.4835GHz
802.11a/n/ac: 5G: 5.150~5.350GHz, 5.725~5.850GHz
Antenna Array antennas (2.4G: 2dBi, 5G: 2dBi)
Spatial Streams 2.4G 2x2MIMO 5G 2x2MIMO
Max Throughput Up to 400Mbps at 2.4G
Up to 867Mbps at 5G
1.267Gbp per AP
Modulation OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and [email protected]/11Mbps
Receiver Sensitivity 11b: -91dBm (1Mbps), -88dBm (5Mbps), -85dBm (11Mbps)
11a/g: -89dBm (6Mbps), -80dBm (24Mbps), -76dBm (36Mbps), -71dBm (54Mbps)
11n: -83dBm@MCS0, -65dBm@MCS7, -83dBm@MCS8, -65dBm@MCS15
11ac HT20: -83dBm (MCS0), -57dBm (MCS9)
11ac HT40: -79dBm (MCS0), -57dBm (MCS9)
11ac HT80: -76dBm (MCS0), -51dBm (MCS9)
Maximum Transmit Power 5.725~5.850GHz: ≤20dBm (EIRP)
5.150~5.350GHz: ≤20dBm (EIRP)
2.4~2.4835GHz: ≤20dBm (EIRP)
Adjustable Power 1dBm
Dimensions 194x194x35mm (excluding mounting kits)
Weight 0.45kg (excluding mounting kits)
Service Ports 2 10/100Base-T Ethernet ports, PoE/LAN1 port supports PoE
Management Port N/A
LED Indicator Single indicator (green light)
Power Supply Local power supply, DC 12V/1.5A (Note: The power adapter is sold as an optional accessory)
802.3af/802.3at PoE
Power Consumption ≤ 12.95W
Environment Operating temperature: 0~40°C
Storage temperature: -40~70°C
Operating humidity: 5~95% (non-condensing)
Storage humidity: 5~95% (non-condensing)
Installation Wall-mount, ceiling-mount
Safety Standard GB4943, IEC 60950-1
EMC Standard GB9254, EN301 489, EN50155, EN50121, EN55032, EN61000, EN55035
Vibration Standard IEC61373
Radio Standard SRRC certification, EN300 328, EN301 893
MTBF >400000H
Software Features
Operating Mode AP mode and routing mode
WLAN Maximum number of clients: 110
Recommended number of clients: 40 (8 at 2.4GHz, 32 at 5GHz)
Up to 8 SSIDs
Support SSID hiding
Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID
SSID-based and radio-based STA limit
Support Layer 2 user isolation
Roaming Support Layer 2 and Layer 3 roaming
Security Support PSK authentication
Support static blacklist and whitelist
Support WPA (TKIP), WPA2 (AES), and WPA-PSK data encryption
Routing Support static IP address, DHCP, PPPoE Dial Up
Management and Maintenance Support unified networking of all network equipment
Support local or remote management with Ruijie Cloud app
Support local management with web
Support remote management with Ruijie Cloud platform
Platform Management Features Automatic RF adjustment via the platform
Unified configuration via the platform
Unified monitoring via the platform

Knowledge Base

  • This field is for validation purposes and should be left unchanged.

You may also need